Micro High Performance Ignition System XHT Flame Detection Device Detector For Iron And Steel
XHT Flame detection device of power station boiler of large combustion equipment of furnace safety supervisory system and a variety of industrial furnace,the key equipment of burner flame detection.The device according to the physical properties of the combustion flame detection,When the flame burning state does not meet the normal condition or flameout,it will show signal by some mode (Switch quantity and analog quantity),as logic judgment of the fault alarm or furnace safety supervisory system(FSSS)
Technical advantages:
Using the latest software and hardware identification technology, with high reliability.
With a self-test function, and has higher safety.
Adapt to all types of fuel, including gas, fuel, coal and other fuel types.
Detection mode, including ion type, light type and image type.
Applications:
XHT Flame detection device is widely used in electric power,Iron and steel, metallurgy, petrochemical and other industries a variety of boiler,burner flame detection, and also can be applied to various occasions the need for flame detection.
Specifications:
|
Sr.
|
Name
|
Model
|
Description
|
|
1
|
Falme scanner
|
XHT-1
|
Contact type flame detector
|
|
2
|
Falme scanner
|
XHT-2
|
Micro flame ionization detector
|
|
3
|
Falme scanner
|
XHT-3
|
UV type, gas and oil flame detection
|
|
4
|
Falme scanner
|
XHT-4
|
Infrared type
|
|
5
|
Falme scanner
|
XHT-5
|
Visible light, infrared hybrid, detection of oil, coal and rich in visible light
of the gas flame; Also applies to low nitrogen oxide NOx bur
|
XHT-2 Micro flame ionization flame detector
1.) basic configuration:
Flame detector 1pcs ,probe 1pcs
2.) Performance parameters:
The flame detector is a small visible type flame detector, mainly used in fuel, Coal fired burner single or double fire detection fire Tsui Tsui, due to its small size, Light weight, easy to realize equipment integration.
Working principle:Target flame light signal via a probe photosensitive element conversion, change to be electric signals and send into the flame processor, flame detector make the electrical signal amplified , after comparison, judgment processing, output switch quantity signal.
|
Name
|
Performance parameters
|
|
Sensitivity
|
≥100Lx 0-550mm
|
|
Reaction time
|
Light fire
|
≤0.5s
|
|
Off fire
|
3S
|
|
Object detection
|
Fuel burning flame
|
|
Switch output
|
2 sets normally open / normally closed contact, capacity;AC220V /50HZ , 5A DC24V , 5A
|
|
operate mode
|
Continuously for a long time
|
|
ambient temperature
|
Probe
|
-40℃~80℃
|
|
Processor
|
0~50 ℃
|
|
ambient humidity
|
≤85 % RH
|
|
Probe cooling mode
|
Air cooling , air flow ≥ 1.5 m³ /min
|
|
Power supply
|
AC220V ± 10% , 50HZ
|
|
Power waste
|
5W
|
Product Tags:
|
|
Micro High Performance Ignition System XHT Flame Detection Device Detector For Iron And Steel Images
|
